Product Description
Extreme curve cutting speed
Affordably priced but technologically advanced.
Achieve the highest return on your investment.
Affordably priced but technologically advanced.
Achieve the highest return on your investment.
Main Features
- A best-in-class cutting pressure of 500g for a wider range of materials
- Up to 2 times the curve cutting speed increases productivity
- Event Notification function for remote monitoring
- Plot start/end, error/warning message - Continuous Crop Mark Detection for precise stickers and seals.
New Segment Compensation, which detects intermediate crop marks, enables accurate contour cutting of long-length prints - Upgrade of firmware can be done quickly and easily by user.
- Ethernet connection for LAN use as well as USB2.0 and RS-232C
- A best-in-class cutting pressure of 500g for a wider range of materials
- Up to 2 times the curve cutting speed increases productivity
- Event Notification function for remote monitoring
- Plot start/end, error/warning message - Continuous Crop Mark Detection for precise stickers and seals.
New Segment Compensation, which detects intermediate crop marks, enables accurate contour cutting of long-length prints - Upgrade of firmware can be done quickly and easily by user.
- Ethernet connection for LAN use as well as USB2.0 and RS-232C
CG-60SRIII
Effective cutting area 606mm (23.8")
Effective cutting area 606mm (23.8")
CG-100SRIII
Effective cutting area 1,070mm (42.1")
Effective cutting area 1,070mm (42.1")
CG-130SRIII
Effective cutting area 1,370mm (53.9")
CG-60SRIII CG-100SRIII CG-130SRIII Acceptable sheet width 90～740 mm 90～1,250 mm 90～1,550 mm Effective cutting area 606 mm 1,070mm 1,370mm Maximum speed Cutting: 70 cm/s, Moving: 100 cm/s Adjustable speed range 1 - 10 cm/s (1 cm/s step adjustment), 1 - 70 cm/s（ 5 cm/s step adjustment） Mechanical resolution X direction: 2.5 μm、Y direction: 5 μm Command resolution 25 μm or 10μm（ MGL-IIc） / 100 μm, 50 μm（ MGL-Ic1） Repeatability *1 ± 0.2 mm / 2 M Effective Repeatability *2 586 mm × 2 M 1,050 mm × 2M 1,350 mm × 2M Maximum pressure 500g Range
of down pressure Cutter 10 - 20 g（2 g step）, 20 - 100 g（5 g step）, 100 - 500g（10g step） Pen 10 - 20 g（2 g step）, 20 - 100 g（5 g step）, 100 - 150g（10 g step） Acceptable sheet *2 Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet Acceptable tool *3 Cutter, Ball-point pen Type of command MGL-IIC / MGL-Ic1 Interface USB2.0、RS-232C、Ethernet Receiver buffer size 27 MB Standard (When sorting, 17 MB) Operational environment 5 - 35 ℃, 35 - 75 ％（Rh）, Non-condensation Power requirement AC 100 V - 240 V, 145 VA or less Dimensions（W×D×H） 1,030 × 430 × 335 mm
（1,030 × 430 × 1,185 mm）*4 1,530 × 580 × 1,150 mm 1,830 × 580 × 1,150 mm Weight 24kg 41kg 46kg Stand Optional equipment Standard equipment Standard equipment
*1: Except for media expansion and contraction due to temperature.
*2: Operated with Mimaki specified media, cutter and cutting conditions.
Thickness of rubber and its cutting speed are limited. Guaranteed accuracy environment: Temperature 12-25℃, Humidity 45-65%
*3: Our dedicated cutter blade and specified commercial ball-point pens are available. (Drawing quality of ball-point pen is not warranted)
*4: When equipped with the optional stand (OPT-0231)
Effective cutting area 1,370mm (53.9")
| CG-60SRIII | CG-100SRIII | CG-130SRIII | ||
|---|---|---|---|---|
| Acceptable sheet width | 90～740 mm | 90～1,250 mm | 90～1,550 mm | |
| Effective cutting area | 606 mm | 1,070mm | 1,370mm | |
| Maximum speed | Cutting: 70 cm/s, Moving: 100 cm/s | |||
| Adjustable speed range | 1 - 10 cm/s (1 cm/s step adjustment), 1 - 70 cm/s（ 5 cm/s step adjustment） | |||
| Mechanical resolution | X direction: 2.5 μm、Y direction: 5 μm | |||
| Command resolution | 25 μm or 10μm（ MGL-IIc） / 100 μm, 50 μm（ MGL-Ic1） | |||
| Repeatability *1 | ± 0.2 mm / 2 M | |||
| Effective Repeatability *2 | 586 mm × 2 M | 1,050 mm × 2M | 1,350 mm × 2M | |
| Maximum pressure | 500g | |||
| Range of down pressure | Cutter | 10 - 20 g（2 g step）, 20 - 100 g（5 g step）, 100 - 500g（10g step） | ||
| Pen | 10 - 20 g（2 g step）, 20 - 100 g（5 g step）, 100 - 150g（10 g step） | |||
| Acceptable sheet *2 | Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet | |||
| Acceptable tool *3 | Cutter, Ball-point pen | |||
| Type of command | MGL-IIC / MGL-Ic1 | |||
| Interface | USB2.0、RS-232C、Ethernet | |||
| Receiver buffer size | 27 MB Standard (When sorting, 17 MB) | |||
| Operational environment | 5 - 35 ℃, 35 - 75 ％（Rh）, Non-condensation | |||
| Power requirement | AC 100 V - 240 V, 145 VA or less | |||
| Dimensions（W×D×H） | 1,030 × 430 × 335 mm （1,030 × 430 × 1,185 mm）*4 | 1,530 × 580 × 1,150 mm | 1,830 × 580 × 1,150 mm | |
| Weight | 24kg | 41kg | 46kg | |
| Stand | Optional equipment | Standard equipment | Standard equipment | |
*1: Except for media expansion and contraction due to temperature.
*2: Operated with Mimaki specified media, cutter and cutting conditions.
Thickness of rubber and its cutting speed are limited. Guaranteed accuracy environment: Temperature 12-25℃, Humidity 45-65%
*3: Our dedicated cutter blade and specified commercial ball-point pens are available. (Drawing quality of ball-point pen is not warranted)
*4: When equipped with the optional stand (OPT-0231)
Model
CG-60SRIII Effective cut width: 606 mm (23.8") CG-100SRIII Effective cut width: 1,070 mm (42.1") CG-130SRIII Effective cut width: 1,370 mm (53.9")
| CG-60SRIII | Effective cut width: 606 mm (23.8") |
|---|---|
| CG-100SRIII | Effective cut width: 1,070 mm (42.1") |
| CG-130SRIII | Effective cut width: 1,370 mm (53.9") |